FS11 Cable Coating 2017-05-18T21:47:21+00:00

FS11 Cable Coating

Refer to our downloads page for complete technical information.

FS11 Cable Coating is a water based, intumescent fire protective coating designed to enhance the fire resistance of electrical power, communication and control cables. It is commonly applied to continuous cable runs to prevent the propagation of fire. It is designed for labour saving spray applications on cables.

With a DFT (Dry Film Thickness) of 1mm it is one of the lowest in the cable coating market. FS11 will also protect the integrity of the cable system for up to 120 minutes under IEC 60331-21

The main function of our Cable Coating system is to prevent flame propagation and stop loss of integrity along vertical and horizontal cable trays. FS11 Cable Coating will also delay short circuit for up to 90 minutes, whereby circuit integrity depends on the distance of the cables from fire and the incurred temperature.

FS11 Cable Coating is easily applied by conventional methods such as spray and brush, as well as by hand (see application data).

FS11 Cable Coating is specifically for applications to provide enhanced fire resistance to electrical power, communications and control cables and it also provides superior performance on horizontal and vertical cable tray systems. No maintenance is required.


  • 120 Minute Fire Rating
  • Water based
  • Intumescent
  • Does not require cable derating
  • Paintable
  • Water resistant
  • Non-toxic / Non-hazardous